The following QR Code is only available for downloading APP. It is totally different with the QR code packed with SMART KIT. Due to different network situation, sometimes, request time-out could happen, thus, it is necessary to do network configuration again.
Wi-Fi App
Installation of Smart Kit (wireless module)
Remove the protective cap of the smart kit (wireless module)
Open the front panel and insert the smart kit (wireless module) into the reserved interface.
Attach the QR code packed with Smart kit (wireless module) to the side panel of the machine, ensure it is convenience to be scanned by the mobile phone. Alternatively, user can take picture of the QR Code and save in into their own phone.
This interface is only compatible with SMART KIT (wireless module) provided by the manufacturer.
Smart Phone camera needs to be 5 million pixels or above to make sure scan QR code well.
Installation of Smart Kit (wireless module)
Smart kit only support WPA-PSK/WPA2-PSK encryption and none encryption .WPA-PSK/WPA2-PSK encryption is recommended. Due to different network situation, control process may return time-out sometimes. If this situation occurs, the display between board and App may not be the same, please do not feel confused.
How to Register
Please ensure your mobile device is connected to Wi-Fi router. Also, the Wireless router has already connected to Internet before doing user registration and network configuration.
Click “Login “
Enter your email address and password
Click “Registration”
It is better to log in your email box and active your registration account by clicking link in case you forget the password. You can log in with the third party accounts.
Network Configuration
It is necessary to forget any other around network and make sure the Android or iOS device just connect to the Wireless network you want to configure.Make sure the Android or iOS device Wireless function works well and can be connected back to your original Wireless network automatically.
Network Configuration for Android Device
Make sure your mobile device has already been connected to the Wireless network which you want to use. Also, you need to forget other irrelevant Wireless network in case it influences your configuration process.
Disconnect the power supply of AC.
Some types of AC do not need the step 2 to be in AP mode. Press “ + Add Device ”
Connect the power supply of AC, and continuously Press the “ LED DISPLAY” or “DO NOT DISTURB” button seven times in 10 seconds.
When the AC displays “AP”, it means that the AC wireless has already entered into “AP” Mode.
Please enter password
Select the appliance you are setting up
Choose the network configuration method

Follow the above steps to enter “AP” mode.
Choose the “Scan the QR code” method. Or choose the “Manual Setup” method.
Configuration Success,
Network configuration is successful you can see the device on the list.
Thing to Remember
User must finish all the steps in 8 minutes after powering on AC, otherwise you need to power on it again.
Network Configuration for iOS Device
Make sure your mobile device has already been connected to the Wireless network which you want to use. Also, you need to forget other irrelevant Wireless network in case it influences your configuration process
Disconnect the power supply of AC (some units).
Connect the power supply of AC, and continuously press the “LED DISPLAY” button or “DO NOT DISTURB” button seven times in 10 seconds.
When the AC displays “AP”, it means that the AC Wireless has already entered into “AP” Mode.
Press “ + Add Device ”
Select the appliance you are setting up
Connect to the Wireless network.
Configuration Success

Follow the above steps to enter “AP” mode.
Please enter password
Network configuration is successful
Now you can see the device on the list
NOTE
When finishing network configuration, APP will display success cue words on the screen. Due to different internet environment, it is possible that the device status still display “offline”. If this situation occurs, it is necessary to pull and refresh the device list on the APP and make sure the device status become “online”. Alternatively, user can turn off the AC power and turn on it again, the device status will become “online” after few minutes.
How to Use App
Please ensure both your mobile device and air conditioner are connected to the Internet before using app to control the air conditioner via internet, please follow the next steps:
Click “Login “
Choose the air conditioner.
Thus, user can control air conditioners on/off status, operation mode, temperature, fan speed and so on.